BarGraph: Refer to Figure 17. This type of meter implements
a linear bar graph display format. Hovering the mouse pointer
over the red portion of the graph pops up a tooltip which
displays the current indicated value and units.
Meter: Refer to Figure 18
. This type of meter implements a
common panel meter-type display format. The units string is
shown on the face of the meter. All raw register values are
interpreted as positive numbers (i.e. 0...0xFFFF equates to
0...65535
10
.)
Figure 17: BarGraph
Figure 18: Meter
To Next Page
Loading...
