Pos/Neg Meter: Refer to Figure 19. Similar to the “meter”
gauge, this type of meter also implements a common panel
meter-type display format, but in this instance the indicated
value can be positive or negative (two’s complement
interpretation). In other words, raw register values of
0…0x7FFF equate to 0...32767
10
, and values of
0x8000...0xFFFF equate to -32768...-1. Because the meter
placard is always centered around zero, the “Min Value”
attribute is not configurable, and the “Max Value” attribute is
used for both the maximum positive indicated value as well as
the maximum negative indicated value.
Thermometer: Refer to Figure 20
. This type of meter
implements the universally-identifiable thermometer display
format. Hovering the mouse pointer over the red “mercury”
portion of the graph pops up a tooltip which displays the
current indicated value and units.
Figure 19: Pos/Neg Meter
Figure 20: Thermometer
To Next Page
Loading...
