97
[Add Variable] The variables to be monitored can be designated.
Input the variable in Variable Name, select the variable type, and then tap on the
[OK] button. (<h>)
[Change value] The value of the variable being watched now is changed. Variable identifier to which
the value is changed is double tapped or [Change value] button (<d>) is tapped while
selected. Variable value change window is displayed.
Please note that the movement of the robot might change by the change enough when
you change the value.
CAUTION
When the variable name is selected and the [Change value] button (<d>) is tapped on, the
window for making changes will appear.
(Location) (Integer, Float, String)
Please tap [OK] button (<i>) after changing the value. However, please note that the movement of the
robot might change by the change enough when you change the value.
<a>
<h>
<d>
<i>
<i>
To Next Page
Loading...
