Mitsubishi R56TB - Operation of the Electric Hand

26
9.15.1. Operation of the Electric Hand
The Electric Hand operation function can be used this software Version 2.5 or later. And the software version of the
controller which you can use is as follows.
Controller Software version of the controller
CR750-D/CRnD-700 Version S2a or later
CR750-Q/CRnQ-700 Version R2a or later
The electric hand table method can be used this software Version 3.1 or later. And the software version of the
controller which you can use is as follows.
Controller Software version of the controller
CR750-D/CRnD-700 Version S3e or later
CR750-Q/CRnQ-700 Version R3e or later
(1) In the case of using version 3.0 or earlier
<a>
<c>
<d>
<b>
<
g
>
<e>
<f>