Mitsubishi R56TB - Erasing the Ruled Line

210
19.1.10.2. Erasing the ruled line
(1) Tap [Line] button (<a>) on the window.
(2) The button (“[Top],[Bottom],[Left],[Right]”) (<b>) for the ruled line is displayed in the right of [Line] button. These
buttons to draw the ruled line disappear when [Line] button (<c>) is tapped again.
(3) Select the kind of ruled line (<d>). Only one kind of the ruled line can be selected.
(4) Tap the block (<e>) where the ruled line is erased. The ruled line of the specified position on the selected block
can be erased.
(5) After editing the ruled line, tap [Line] button (<f>) again.
<d>
<e>
<f>
<a>
<b><c>