119
(3) Save to file, Read from file in T/B
Tap [Save to file] button (<a>), the current origin data is saved into the designated file.
Tap [Read from file] button (<b>), the origin data in the designated file is loaded.
16.1.2. The others (Mechanical stopper, TOOL, ABS, User origin method)
These origins set way is shown almost the same screen, and do the same operation.
In the following, explain “Mechanical stopper” as an example.
(1) Select the axes for origin setting
Tap the axis string (ex. “J1”, “J2”, …), and the selection is switched.
<a>
<b>
To Next Page
Loading...
