39
11.1.4. Save (USB memory)
T
ap the [Save] button (<a>) of the edit screen.
Since the confirmation screen is displayed, the [Yes] button (<b>) is tapped if it saves. The [No] button (<b>) is
tapped if it does not save. During the save, if the sandglass is displayed and it completes, it will return to the
original edit screen.
The buttons displayed differ by the case where the edit screen targets the robot controller and the case where the
edit screen targets the USB memory. The functions, which can be executed, also differ.
The save of the program can be executed even in the command editing screen or the position editing screen.
Advice
<a>
<b>
To Next Page
Loading...
Need help?
General
