Mitsubishi R56TB User Manual

71
11.3.8. Copy position data for SQ Direct Function from USB to controller
1) Select the [USB] in the Program list screen, select the file of position data for SQ Direct Function (<a>) in the
list, and tap the [Copy/Move] button (<b>). The Copy/Move screen will appear.
The files of position data for SQ Direct Function are saved as extension “sdp”. By using the [File type] (<c>),
only the files of position data for SQ Direct Function can be displayed.
2) Confirm that the file of position data for SQ Direct Function in USB memory is selected in the [Source] list,
select the [Robot] (<d>) as the destination and tap the [Copy] button (<e>).
3) “Setting for copy” screen will appear.
Tap the [OK] button (<f>), the position data for SQ Direct Function in the USB memory is saved on the
controller.
The position data for SQ Direct Function in the USB memory cannot move to the controller. Please
copy to the controller and delete the file in the USB memory.
C
A
U
TI
O
N
2)
<a> <b>
<d>
<e>
<f>
1)
3)
<c>

Mitsubishi R56TB Specifications

General

Brand	Mitsubishi
Model	R56TB
Category	Robotics
Language	English