207
19.1.7. Copy/movement of parts
Parts can be copied or be moved.
(1)
T
ap the part to copy
, and select it (<a>).
(2) After "Edit menu" window is displayed, tap [Copy] button (<b>). When parts are moved, tap [Move] button.
(3) Tap the position(block) where the part is copied onto (moved to).
At this time, the current position(block) of part is red, and the position(block) where the part is copied onto is
green. Tap [Yes] button (<d>) on the confirmation message.
<a>
<b>
<c>
<d>
To Next Page
Loading...
