195
(3) Tap [Signal No.] button (<e>), and input
"20" to signal number (<f>).
Tap the state of the signal (<g>), and
select "High".
Now, select "Input signal".
(4) Select "High" as signal operation of
when tapping on a button (<h>).
(5) The input area of output signal number
is displayed.
Tap [Signal No.] button (<j>), and input "20"
to the signal number (<i>).
(6) After the setting is completed, tap [OK]
button (<k>).
<i>
<j>
<k>
<e><f>
<g>
<h>
To Next Page
Loading...
