21
2. Tap a part of axis name<c> of axis to operate on the JOG operation screen, the axis becomes the target
axis for the operation. If the target axis is set, it becomes Wheel-jog mode. And the Wheel-mark<d> is
displayed.
If tapping other axis name, the target axis changes into that axis.
Moreover, if tapping axis name of current target again, it is released.
3. Turn the servo on, and rotate the wheel with pushing the enable switch of T/B. The target axis for the
operation is moved in fixed-dimension feed.
Right rotation : Direction of +
Left rotation : Direction of -
<c>
<d>
To Next Page
Loading...
