Mitsubishi R56TB - New Program Creation

35
4) If a program name is inputted by the keyboard of a screen and the [Enter] key (<e>) is tapped, a command
edit screen will be displayed.
The inputted character is displayed on "Program"
The buttons displayed differ by the case where the edit screen targets the robot controller and the case where the
edit screen targets the USB memory. The functions, which can be executed, also differ.
The edit screens include the command editing screen and the position editing screen.
The command editing screen will be displayed first.
If the ［XYZ］、［XYZ󳊉Global󳊊］、［Joint］、or ［Joint󳊉Global󳊊］ button is tapped, the display will be changed to the
position edit screen. And, if the [Command] button is tapped, the display will be changed to the command editing
screen.
Advice
Keyboard Command edit screen
(Creates to the robot controller)
Command edit screen
(Creates to the USB memory)
<e>