Motion Control Engineering 2000 - Page 293

Index-11
Troubleshooting
duplexing 5-108
MLT / VLT Data Trap 6-74
Setting parameters to default values 5-13
Software/firmware versions 5-106
Status Displays 5-106
Troubleshooting specific problems 5-12
Troubleshooting tools 6-2
using computer internal memory 5-9
using External Memory mode 5-57
Using job prints 2-5
Using Status and Error Messages 6-3
Verifying cartop communication 6-66
Troubleshooting tools 6-2
TSLB, Bottom Terminal Slow Limit Input 5-38
TSLT, Top Terminal Slow Limit Input 5-38
U
UC, Up call flag 5-11
UCA, Up call above flag 5-11
UCB, Up call below flag 5-11
UCR, Up call (rear) flag 5-11
UDP, Up direction preference flag 5-11
UETS 6-44
UFL, Up Final Limit Input 5-38
UFP, Upper parking floor flag 5-11
UFQ, Up first qualifier flag 5-11
UP AND DOWN TERMINAL SPEED REDUCING LIMITS
OPEN message 6-35
UP NORMAL LIMIT OPEN message 6-35
UP TERMINAL LIMIT FAILURE message 6-36
UP TO SPEED TIMER option 5-54
UPD, Up previous direction flag 5-11
UPDO, Up direction output flag 5-11
UPI, Up Input (Attendant Service) 5-38
UPO, Up Output (Attendant Service) 5-47
UPS, Up direction sense input flag 5-11
UPS, Up Sense output 5-47
USD, Up slow down input flag 5-11
V
VALVE LIMIT TIMER 5-27
Valve Limit Timer (Anti-stall) Elapsed message 6-36
VALVE TYPE option 5-54
VCA, Viscosity active flag 5-11
VCI, Viscosity Control Input 5-38
VCI, Viscosity Input flag 5-11
Version number of the monitoring software 5-98
View assigned spare outputs 5-39
View car speed and distances 5-72
View events 5-71
Viscosity Control Function message 6-36
VLT, Valve limit timer flag 5-11
W
WHITE PLAINS, NY FIRE CODE option 5-20
WILL THIS CAR RUN ON PH2? option 5-20
wiring
controller wiring 2-7
ground wiring 2-8, 2-9
main AC power 2-9
pump motor 2-9
wiring prints, description of 2-5
WLD, Emergency Dispatch Input 5-38
WLDI, Wild Operation Indication Output 5-47
WP SECURITY ACTIVATED 6-36
WPIx (A - H), Wandering Patient Security (Bracelet Security)
inputs 5-38
WPIx LANDING? (x = A thru H) parameter 5-49
X
XDSA, Auxiliary Supervisory Down Arrow Output 5-47
XPI1-XPI7, Auxiliary Position Indicators 1 thru 7 Outputs 5-
47
XPort Comm Resets screen 5-99
XSUA, Auxiliary Supervisory Up Arrow Output 5-47
Y
Y-D OPEN TRANSN. TIMER option 5-54
Y-D TRANSFER TIMER option 5-54
YRD INPUT FAILURE message 6-36
Z
ZADJ, Zero Adjust Output 5-47