MR ETOS IM - Displaying Measured Value Recorder (Optional)

7 Operation
Maschinenfabrik Reinhausen GmbH 2019 1695163667/06 EN ETOS
®
IM
The following measured values are displayed:
▪ Voltage
▪ Current
▪ Power factor (cos ϕ)
▪ Frequency
▪ Reactive power
▪ Active power
▪ Apparent power
Figure119: Measured values
To display the current measured values, proceed as follows:
► Go to Information > Measured values.
7.10.2 Displaying measured value recorder (optional)
You can use the optional measured value recorder function to display the
progress of measured values and signals over time.
Depending on device configuration, you can select the following measured
values and signals for the display:
Signal Description
P_m L1 Active power L1 (average value)
P_m L2 Active power L2 (average value)
P_m L3 Active power L2 (average value)
P_m Active power in total (average value)
S_m L1 Apparent power L1 (average value)
S_m L2 Apparent power L2 (average value)
S_m L3 Apparent power L3 (average value)