MR ETOS IM - Setting the Device Language

6 Commissioning
Maschinenfabrik Reinhausen GmbH 2019 895163667/06 EN ETOS
®
IM
Figure81: Sample dielectric test set-up for a device designed with the G1 (PULS) power supply
6.2 Setting the language
You can use this parameter to set the display language for the device. The
device comes with a maximum of 4 languages. The following languages are
available:
English Italian*
German Portuguese*
French* Russian*
Spanish* Chinese*
Korean* -
*) Language is available as an option
To set the language, proceed as follows:
1. Select the Language button in the status bar, or as an alternative go to
Settings > General > Language.
Figure82: Setting the language
2. Select the language you want from the list box.
3. Press the Accept button to save the modified parameter.
ð The "Restart device" dialog appears.