MR ETOS IM - Displaying Winding Temperatures (Optional)

7 Operation
Maschinenfabrik Reinhausen GmbH 2019 1755163667/06 EN ETOS
®
IM
Figure124: Temperature curve
Generic temperatures
If you are using additional temperature sensors (generic temperature 1...8),
you can display the temperature curve for these temperatures over the last
10 days. To do so, proceed as follows:
► Go to Information > Gener. temperatures.
Figure125: Generic temperatures
7.10.5 Displaying winding temperatures (optional)
If you record the winding temperatures with a sensor, you can display the
temporal progression of the measured winding temperatures over the last 10
days. To do so, proceed as follows:
► Go to Information > Winding temperature 1-12/13-24.