MR ETOS IM User Manual

7 Operation
Maschinenfabrik Reinhausen GmbH 2019 3035163667/06 EN ETOS
®
IM
Authentication protocol
You can use this parameter to set the authentication protocol through which
the server and client communicate. You can select the following options:
▪ PAP (password authentication protocol)
▪ CHAP (challenge handshake protocol)
Key (shared secret)
You can use this parameter to set the key (shared secret). You must set up
the same key on the RADIUS client and the RADIUS server. The key may
contain a maximum of 127 characters from the ASCII character set.
7.27 Information about device
In this menu, you can view information about the device.
7.27.1 Hardware
Under Hardware, you can display information about the device's hardware.
For the assemblies, you will find information about the signal level of the in-
dividual channels.
Figure218: Displaying information about the device's hardware
To retrieve information on the hardware, proceed as follows:
1. Go to Information > Hardware.
2. Select the Assembly you want in order to display the signal levels of the
channels.

MR ETOS IM Specifications

General

Brand	MR
Model	ETOS IM
Category	Measuring Instruments
Language	English