MR ETOS IM - Importing Data (Software Version 3.44 and Later)

7 Operation
Maschinenfabrik Reinhausen GmbH 2019308 5163667/06 ENETOS
®
IM
7.28.2 Importing data (software version 3.44 and later)
You can import the following data:
Option Description
System image Complete image of the system (software and configura-
tion), with or without history.
Settings All device settings:
▪ Parameter settings
▪ Event settings
▪ Administrative settings (users, access rights)
The settings can also be imported from another device.
Language Import of additional languages. You can install a maximum
of 5 different languages on the device. If 5 languages are
already installed, you will be asked to delete one during the
import process.
SSL certificate Import of an SSL certificate with associated key:
▪ Server certificate (.crt + .pem)
▪ Client certificate (.crt + .pem)
▪ Client CA (.crt)
For the import, you will have to compress the certificate
(*.crt) and key (*.pem) in a zip file.
You can import certificates with the following key authenti-
cation:
▪ RSA with 1024 bits
▪ ECDSA with 256 bits ("secp256r1" or "prime256v1"
curve).
Data point configura-
tion
Data point configuration import
SCD import Control system configuration import
TPLE Customer program import (TPLE).
Table91: Importing data
NOTICE
Damage to the file system!
The file system can become damaged due to an incorrect data transmission
process. A damaged file system can lead to the device no longer being
functional.
► Do not disconnect the device from the power supply during the import.
► During the import, do not remove the USB stick or disconnect the network
connection.
To import data, proceed as follows:
1. Go to Settings > Import.
2. Select the desired option for data transmission (PC or USB).