MR ETOS IM - Page 307

7 Operation
Maschinenfabrik Reinhausen GmbH 2019 3075163667/06 EN ETOS
®
IM
Option Description
Customer pro-
gram
Customer program export (TPLE).
Event memory All event memory entries.
Recorder Measured value memory export.
Parameter list Parameter list with descriptive text and values (min, max, current).
Event list Complete list of all possible events.
SCADA config-
uration
Control system configuration (e.g. ICD file for IEC 61850).
Operating in-
structions
Operating instructions, protocol specifications.
Settings Configuration of parameters and events.
Data point con-
figuration
Data point configuration of the control system.
Sensor bus de-
vice descrip-
tion
Sensor description of the sensors for MR sensor bus that have
been created with the sensor editor.
Service data Device data for support through the Maschinenfabrik Reinhausen
GmbH Technical Service department
Security log Logbook of all instances of access and changes relating to secu-
rity.
RADIUS dictio-
nary
Dictionary for importing on a RADIUS server.
Table90: Exporting data
Only remove the USB stick once the data transfer is complete. Otherwise
data may be lost.
To export data, proceed as follows:
1. Go to Settings > Export.
2. Select the desired option for the export.