MR ETOS IM - Page 258

7 Operation
Maschinenfabrik Reinhausen GmbH 2019258 5163667/06 ENETOS
®
IM
2. Enter IED name.
3. Press the Accept button to save the modified parameter.
Device ID
You can use this parameter to assign the device a device ID in order for it to
be identified in the IEC 61850 network.
To set the device ID, proceed as follows:
1. Go to Settings > Parameters > IEC 61850 > Device ID.
2. Enter a device ID.
3. Press the Accept button to save the modified parameter.
Access point
You can use this parameter to assign the access point a name in the IEC
61850 network.
To set the access point name, proceed as follows:
1. Go to Settings > Parameters > IEC 61850 > Access point.
2. Enter access point.
3. Press the Accept button to save the modified parameter.
Edition
You can use this parameter to switch between edition 1 and edition 2 of the
control system protocol IEC 61850.
To select the edition of the IEC 61850 control system protocol, proceed as
follows:
1. Go to Settings > Parameters > IEC 61850 > Edition.
2. Select the option you want.
3. Press the Accept button to save the modified parameter.
Downloading ICD file
You can download the ICD file from the device via the Import/Export Man-
ager [►Section 7.28, Page 306]. To do this, you have to establish an Ether-
net connection between the device and your PC.
For a smooth download with Windows Vista/7/8 operating systems, use
Windows Explorer.