MR ETOS IM - Page 313

7 Operation
Maschinenfabrik Reinhausen GmbH 2019 3135163667/06 EN ETOS
®
IM
Parameter Description
Independent regulation If the assigned event is active, the device
activates simplex mode.
Deactivate parallel operation If the assigned event is active, the device
deactivates parallel operation.
Blocking If the assigned event is active, automatic
voltage regulation is blocked.
Activate remote mode If the assigned event is active, the device
activates remote mode.
High-speed return If the assigned event is active, the device
activates high-speed return.
Target-tap-position operation If the assigned event is active, the device
switches to the defined target tap posi-
tion.
Activate desired value 1 If the assigned event is active, the device
activates desired value 1.
Activate desired value 2 If the assigned event is active, the device
activates desired value 2.
Activate desired value 3 If the assigned event is active, the device
activates desired value 3.
Activate desired value 4 If the assigned event is active, the device
activates desired value 4.
Activate desired value 5 If the assigned event is active, the device
activates desired value 5.
Increase desired value If the assigned event is active, the device
prompts an increase in the desired
value.
Decrease desired value If the assigned event is active, the device
prompts a decrease in the desired value.
Table94: Functions available
Figure224: Link functions