8-4 Error messages
Error code Error message Countermeasure
R.1.2 Confirm the remote fax. If you know who the sending party is, ask them
to transmit the document again. If this error
continues to occur, contact your local technical
representative.
Reception error. Remote fax is not
compatible.
The remote fax could not receive the fax because
the security function is set. For details, see
“Security fax functions”(page 4-18).
Reception error. No passcode
stored on remote fax.
Reception error. Passcode does not
match.
Confirm the remote fax. Check the settings on the other party’s machine.
Confirm the remote fax. If you know who the sending party is, ask them
to transmit the document again. If this error
continues to occur, contact your local technical
representative.
R.2.3 Confirm the remote fax. If you know who the sending party is, ask them
to transmit the document again. If this error
continues to occur, contact your local technical
representative.
R.3.1
R.3.3 Reception was stopped.
R.3.4 Cannot receive at minimum speed.
R.3.6 Some pages were not received
correctly.
R.4.1 Inbound document cannot be
received.
If you know who the sending party is, request
them to cut the document and transmit it again.
R.4.4 Memory overflow. Print the stored documents in memory or take
other measures to make more free memory. If
you know who the sending party is, ask them to
transmit the document again.
R.4.2 Confirm the remote fax. If you know who the sending party is, ask them
to transmit the document again. If this error
continues to occur, contact your local technical
representative.
R.5.1
R.5.2
R.8.1 Cannot send a fax in SuperG3
mode.
R.8.10
R.8.11
To Next Page
