NEC DSX Feature Handbook

Dial Codes by Feature
DSX Dial Codes Sorted by Feature
Dial Codes by Feature
When you areDial this code
For this feature
Barging-In on a co-worker’s call4Barge In (Intrusion)
Using Line Dial-Up to place an
outside call
INTERCOM + #9 + Line number
(e.g., 01)
Call Waiting / Camp-On
Using Line Dial-Up to place an
outside call
INTERCOM + #9 + Line number
(e.g., 01)
Central Office Calls, Placing
Using Direct Line Access to place
an outside call
INTERCOM + Line extension
number (e.g., 101)
Accessing a Line Group to place
an outside call
INTERCOM + 9 or 90-98
Previewing a number before
dialing
*Dial Number Preview
Intercepting a call ringing a
co-worker’s extension
INTERCOM + ** + ExtensionDirected Call Pickup
Flashing a line at a single line
extension
#3Flash
Using Forced Line Disconnect to
disconnect a busy outside line
#Forced Line Disconnect
Answering a call ringing a phone
in your Pickup Group
INTERCOM + *#Group Call Pickup
Picking up an outside call on
System Hold at a co-worker’s
extension
INTERCOM + *4 + Line number
(e.g., 01)
Hold
Placing an Intercom call to a co-
worker
INTERCOM + Extension (e.g., 301)Intercom
Setting up or joining a Meet-Me
Conference
INTERCOM + #11 or #12Meet-Me Conference
Setting up Monitor after calling a
busy co-worker
6Monitor / Silent Monitor
Answering a call ringing UNA at
night
** + UNA code (01-04)Night Service / Night Ring
Making an internal Paging
announcement
INTERCOM + *1 + Page zone (1-7
or 0 for All Call)
Paging
Parking or retrieving a call from
System Park Orbit
INTERCOM + * + System Park
Orbit (60-69)
Park
DSX | Introduction | 11
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/

NEC DSX Specifications