EasyManua.ls Logo

NEC DSX - Call Forwarding off Premises; To Set up Call Forwarding off Premises at a Keyset

NEC DSX
192 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Call Forwarding Off Premises
When you are out of the ofce, you can send your calls to your home ofce or cell phone.
Off Premises Call Forwarding allows you to automatically forward your calls to an off-site location (such as a cell phone or
remote ofce). To set up Off Premises Call Forwarding, you select the line, Line Group, or Prime Line over which your calls
should route, as well as the number the system should dial. The number dialed can be one of your Personal Speed Dial numbers
containing an outside number, or you can enter an outside number directly. When a call rings the forwarded extension, the
system selects the specied route and then outdials the stored number.
Off Premises Call Forwarding can reroute:
Intercom calls
Transferred calls
Direct Inward Lines
UTRF (unscreened transfer) calls routed from the voice mail Automated Attendant
Circular and Terminal Extension Hunting calls
Off Premises Call Forwarding can not reroute:
Key Ring calls
Group Ring calls (i.e., calls to a Ring Group master number)
UCD Group Calls (i.e., calls to a UCD Group master number)
Ringing Call Coverage key calls
You can set up Off Premises Call Forwarding to reroute all your calls or just outside calls. If your extension has forwarding
set for outside calls and you receive a screened Transfer, the initial voice-announcement broadcasts over your telephone speaker
extension. When the caller hangs up to complete the transfer, the outside call forwards as programmed.
To set up Call Forwarding Off Premises
at a keyset:
Setting Up Call Forwarding Off Premises (Keyset)
Next: Go to next selection. Prev: Go to previous selection. Select: Select current Option. Back: Back out
of current option. Exit: Exit Menu setup.
Select the Call Forwarding sub-menu
Menu +
60
Enter the Call Forwarding setup mode.
Select
Turn Call Forwarding on (if set up and enabled).On
Turn Call Forwarding on (if set up and enabled).Off
Set up your Call Forwarding options.Edit
62: Call Forwarding Type
Select the Call Forwarding Type and enter the options.
Immediate
See Call Forwarding on page 32 for more.
Ring No Ans
See Call Forwarding on page 32 for more.
36 | DSX | Features
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/

Table of Contents

Other manuals for NEC DSX

Related product manuals