NEC DSX - Hot Dial Pad; Using Hot Dial Pad

Hot Dial Pad
Dial a call without first lifting the handset or pressing any keys.
Hot Dial Pad allows you to place a call without first lifting the handset, pressing a line key, or pressing INTERCOM. With Hot
Dial Pad enabled, you can more easily place Intercom calls (without first pressing INTERCOM), quickly place outside calls
(using Line Group Access and Direct Line Access), and even use the User Programmable Features.
Hot Dial Pad is not available with the following features which use # as the first access digit:
• Placing a Speed Dial call (e..g., #701 or #201).
• Programming (#*#*).
• Extension Locking (##0, ##3, ##5, and ##6).
Using Hot Dial Pad
To use Hot Dial Pad:
1. Do not lift the handset, press
INTERCOM, or press a line key.
2. To call a co-worker, just dial their extension number.
3. To place an outside call, just dial a line access code (e.g., 9) followed by the outside number.
To enable Hot Dial Pad for your keyset:
Enabling Hot Dial Pad (Keyset)
Next: Go to next selection. Prev: Go to previous selection. Select: Select current Option. Back: Back out
of current option. Exit: Exit Menu setup.
Select the Hot Dial Pad sub-menu.
Menu +
34
Enable Hot Dial Pad for your extension.
On
Disable Hot Dial Pad for your extension.Off
Save your entry and go to the previous level.Back
To enable Hot Dial Pad for your Super Display:
Enabling Hot Dal Pad (Super Display)
Next: Go to next selection. Prev: Go to previous selection. Select: Select current Option. Back: Back out
of current option. Exit: Exit Menu setup.
Select the Hot Dial Pad sub-menu.
Menu +
Features
+ Hot
Dialpad
Turn Hot Dial Pad on.
On
Turn Hot Dial Pad off.Off
Save your entry and go back to the previous level.Back
Exit to the idle menu display.Exit
112 | DSX | Features
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/