NEC DSX Feature Handbook

Night Service / Night Ring
Night Service reroutes calls after hours.
If you are an attendant or a supervisor, you may be able to press a key and put the system in the night mode. You would
typically activate the night mode after normal working hours, when most employees are unavailable to answer calls. For
example, your system may be set up to send calls to the security station at night.
Line Scheduling may be set up to automatically change your call routing and put your system in the night mode. Check with
your communications manager.
Using Night Service / Night Ring
To put the system in the night mode (if you have a Night key):
1. Press your Night key.
a) Your Night key is on (red) when the system is in the night mode.
2. Press your Night key again to put the system back into the day mode.
a) Your Night key goes out when the system is in the day mode.
To answer a call you hear ringing over the Paging system:
1. Lift the handset.
2. Dial
*0.
a) If this doesn't answer the call, your system is using a Paging system that doesn't provide this feature.
3. Talk to the caller.
To assign a Night key:
1. Push
Menu.
• Super Display: Push Key Assignment + Feature Keys.
• Keyset: Dial 51.
2. See Feature Keys on page 89for more.
DSX | Features | 139
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/

NEC DSX Specifications