Line Keys
Press a line key for one-touch access to an outside line.
A line key provides you with one-button access to a specific outside line. Just press a line key to place or answer a call on the
line. There is no need to dial codes to access or intercept outside calls. In addition, a line key provides a Busy Lamp Field
(BLF) for the line to which it is assigned (see the table below).
Line Key BLF Indications
The line is:
When the key is:
Idle or not installedOff
In use or on Exclusive Hold at a co-worker’s extensionOn (red)
In use at your extensionOn (green)
On System Hold at a co-worker’s extensionWink On (red)
On System Hold at your extensionWink On (green)
On Exclusive Hold or recalling your extensionDouble Wink On (green)
Ringing into the systemSlow Flash (red)
Ringing or recalling directly to your extensionSlow Flash (green)
Using Your Line Keys
To place a call using a line key:
1. Lift the handset.
2. Press the line key.
3. Dial the outside number.
To answer a call using a line key:
1. Listen for ringing and look for the flashing line key.
a) Line keys that flash red are for you and your co-workers.
b) Line keys that flash green are just for you (such as DILs and transfers).
2. Lift the handset.
3. Press the flashing line key.
a) If you have Ringing Line Preference, lifting the handset answers the call.
b) If you have Automatic Handsfree, while on a call you can press another line key to put your first call on Hold.
To set up Line Key ringing at your keyset:
Setting Up Line Key Ringing (Keyset)
Next: Go to next selection. Prev: Go to previous selection. Select: Select current Option. Back: Back out
of current option. Exit: Exit Menu setup.
124 | DSX | Features
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/
To Next Page
Loading...
