NEC DSX Feature Handbook

Setting Up Call Forwarding Off Premises (Keyset)
Busy No Ans
See Call Forwarding on page 32 for more.
Off Premise Speed Dial
Reroute your calls off premise using a number stored in your
Personal Speed Dial.
1. Push Select then << or >> to choose the Personal Speed
Dial number.
2. Push Next.
3. Push All to forward all calls, or Line to forward just outside
calls.
4. Push Save to save your setup or Cancel to quit without
saving.
Off Premise Number
Reroute your calls off premise using a number stored at your
phone.
1. Push Select then << or >> to select the route over which
your call should be forwarded (line, line group, or your
Prime Line).
2. If you pushed Line, enter the line number (1-64); if you
pushed Line Group, enter the line group number (90-98).
3. Push Next.
4. Enter the number (16 digits max.) you want the system to
dial when rerouting your call off premise.
5. Push Next.
6. Push All to forward all calls, or Line to forward just outside
calls.
7. Push Save to save your setup or Cancel to quit without
saving.
AME
See Answering Machine Emulation in the IntraMail Feature
Handbook for more.
Display Message
See Selectable Display Messaging on page 164 for more.
To set up Call Forwarding Off Premises
at a Super Display:
Setting Up Call Forwarding Off Premises (Super Display)
Next: Go to next selection. Prev: Go to previous selection. Select: Select current Option. Back: Back out
of current option. Exit: Exit Menu setup.
DSX | Features | 37
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/

NEC DSX Specifications