NEC DSX Feature Handbook

Storing a Speed Dial Number (Super Display)
Cancel your entry.
Cancel
Scroll left and right to edit the name.<- ->
Back up to the previous level.Back
Exit to the idle menu display.Exit
Exit to the idle menu display.Exit
Exit to the idle menu display.Exit
Scroll backward through the Speed Dial locations.Prev
Scroll forward through the Speed Dial locations.Next
Back up one level.Back
Exit to the idle menu display.Exit
Go back one level.Back
Exit to the idle menu display.Exit
Calling a Stored Speed Dial Number
• Forced Account Codes may prevent Speed Dial from dialing 911 emergency services.
To call a Speed Dial number.
1. Do one of the following:
a) Press INTERCOM + Dial # + Dial the Speed Dial location.
Locations are 701-720 for Personal, 001-999 for Company.
b) [Personal at keyset only] Press a Speed Dial One-Touch key.
c) [Personal at Super Display only] Push Spd Dial 1 for locations 701-710 or Spd Dial 2 for locations 711-720,
then a soft key for the number you want to call.
d) [Personal at Super Display only] Push idle menu soft key for Personal Speed Dial location,
e) [Super Display only] Push Directory + Extension, Pers, or Cmpy + select location.
f) [Keyset only] Push Dir + Ext, Personal, or Company + select location.
g) Press a Feature Key assigned for Personal or Company Speed Dial.
2. Optionally choose one of the following:
a) To chain (link) stored numbers, wait for the first number to dial out and then press a One-Touch Key or
Feature Key.
b) If the programmed route is busy, press an idle line key to reroute the call.
c) You cannot chain (link) Intercom numbers.
To assign a Speed Dial key:
1. Push
Menu.
• Super Display: Push Key Assignment + Feature Keys.
• Keyset: Dial 51.
170 | DSX | Features
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/

NEC DSX Specifications