NEC DSX Feature Handbook

Ringdown Extension
Call another extension, group or voice mail just by lifting the handset.
A Ringdown Extension automatically calls a co-worker, voice mail, a Ring Group, a UCD Group, or a Speed Dial number
when you lift the handset. The call automatically goes through — there is no need for you to dial digits or press additional
keys. You may have a Ringdown Extension in your lobby, on your service desk, or at the service entrance.
Using Ringdown
To use the Ringdown extension:
1. Lift the handset or press
SPEAKER.
2. You connect to the ringdown destination.
To bypass ringdown:
1. Press
INTERCOM, a line/loop key, or a Feature Key before lifting the handset or pressing SPEAKER.
2. You will not connect to the ringdown destination.
158 | DSX | Features
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/

NEC DSX Specifications