NEC DSX Feature Handbook

Split (Alternate)
Use Split to split (alternate) between your current call and a new call without conferencing the calls together.
Using Split
To Split between your current Intercom call and a new Intercom call:
1. Press
HOLD to place your Intercom call on Hold.
2. Wait for INTERCOM to change from wink off (green) to slow flash (green).
3. Press INTERCOM to answer your new Intercom call.
a) INTERCOM winks off (green) to indicate that you have an Intercom call on Hold.
4. Press your Split key to switch between your two Intercom calls.
To Split between your current outside call and an Intercom call:
1. Press
TRANSFER to place your outside call on Hold.
2. Hang up.
3. Do one of the following:
a) Place your new Intercom call.
b) Hang up + press flashing INTERCOM to answer the waiting Intercom call.
4. Press your Split key to switch between your Intercom call and outside call.
To Split between your current Intercom call and an outside call:
1. Press
HOLD to place your current Intercom call on Hold.
2. Answer the outside call.
3. Press your Split key to switch between your outside call and Intercom call.
To Split between your current outside call and a waiting outside call:
1. Press
INTERCOM to place your current outside call on Hold.
2. Place or answer a new outside call.
3. Press your Split key to switch between your two outside calls.
To assign a Split key:
1. Push
Menu.
• Super Display: Push Key Assignment + Feature Keys.
• Keyset: Dial 51.
2. See Feature Keys on page 89 for more.
172 | DSX | Features
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/

NEC DSX Specifications