NEC DSX Feature Handbook

To set up Line Key ringing at your Super Display:
Setting Up Line Key Ringing (Super Display)
Select the Ring Assignments sub-menu.
Menu +
Ringing
Select the Key Assignments sub-menu.
Key
Assignments
Your line keys will light. Press a line key repeatedly to set its ringing mode:Line
• Always (key LED is on green)
• Night Ring (key LED flashes slow green)
• Delay Ring (key LED flashes fast green)
• Lamp Only (key LED is on red)
Dial a digit (0-4) to set the Ring Type:
0 for Standard
1 for Ring Type A
2 for Ring Type B
3 for Ring Type C
To assign a line key:
1. Push Menu.
• Super Display: Push Key Assignment + Feature Keys.
• Keyset: Dial 51.
2. See Feature Keys on page 89for more.
Setting the Ringing Volume Preset
• This preset sets the default volume of your incoming ringing.
To set the ringing volume preset at a keyset:
Setting the Ringing Preset (Keyset)
Next: Go to next selection. Prev: Go to previous selection. Select: Select current Option. Back: Back out
of current option. Exit: Exit Menu setup.
Select the Ringing Preset sub-menu.
Menu +
11
Turn the default ringing volume down. The minimum setting is off.
Down
Turn the default ringing volume up.Up
Save your entry and back up to the previous level.Back
DSX | Features | 51
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/

NEC DSX Specifications