NEC DSX - Unlocking an Extension and Erasing Its PIN Number

5. When you see NEW PIN ACCEPTED, push Exit.
To change your PIN number (if you already have one assigned):
1. Press
INTERCOM.
2. Dial ##6.
3. When you see Enter PIN Code:
a) Enter your existing PIN number + HOLD.
b) When entering your PIN number: CLEAR erases your entire entry. REDIAL backspaces over (erases) the last
digit entered.
4. When you see Enter New PIN, enter your new PIN number + HOLD.
5. When you see Re-Enter New PIN, confirm your entry by reentering your new PIN number.
6. When you see NEW PIN ACCEPTED, push Exit.
Unlocking an Extension and Erasing It's
PIN Number
• This capability is normally available at extension 301.
To unlock an extension (and clear the extension’s PIN number) at a keyset:
Unlocking an Extension (Keyset)
Next: Go to next selection. Prev: Go to previous selection. Select: Select current Option. Back: Back out
of current option. Exit: Exit Menu setup.
Select the Admin Clear PIN Code sub-menu.
Menu +
04
• You must have a PIN number entered for your phone to use this feature.
Enter your own PIN code.
Enter
PIN
Code
Select to accept your PIN code and enter the Clear Pin sub-menu.Next
Back up the previous level.Back
Enter the extension to unlock (which also clears its PIN number).Clear
Pin On
Ext
Select the extension.Next
Back up to the previous level without selecting the
extension.
Back
Clear the PIN number and unlock the
extension.
Yes
Back up to the previous level without
clearing the PIN number and unlocking
the extension.
Cancel
DSX | Features | 87
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/