NEC DSX Feature Handbook

Forced Line Disconnect
Forced Line Disconnect allows you to disconnect (release) another extension’s active outside call. You would typically do
this in an emergency, when no other lines are available.
Using Forced Line Disconnect
• Forced Line Disconnect abruptly terminates the active call on the line. Only use this feature in an emergency
and when no other lines are available.
• Your communications manager can tell you if your phone has Forced Line Disconnect capability.
To disconnect a busy line:
1. Do one of the following:
a) Press the line key for the busy line.
b) Press INTERCOM and dial the line’s extension number (e.g., 101 for line 1).
2. When you hear busy tone, dial # to disconnect the line.
3. You hear Intercom dial tone and the line key goes out.
a) You can now place a new call on the line.
98 | DSX | Features
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/

NEC DSX Specifications