Delayed Ringing
Helps you if you cover a co-worker's unanswered calls.
Delayed Ringing allows a line to start ringing a preset interval after the call starts flashing a line key. This is helpful if you
cover a co-worker's calls. For example, you can have Delayed Ringing for the lines that immediately ring a co-worker's
telephone. If your co-worker doesn’t answer after the preset interval, the call will start ringing your phone.
To set up Line Key ringing at your
keyset:
Setting Up Line Key Ringing (Keyset)
Next: Go to next selection. Prev: Go to previous selection. Select: Select current Option. Back: Back out
of current option. Exit: Exit Menu setup.
Select the Ring Key Assignments sub-menu.
Menu +
41
Your line keys will light. Press a line key repeatedly to set its ringing mode:
Select
• Always (key LED is on green)
• Night Ring (key LED flashes slow green)
• Delay Ring (key LED flashes fast green)
• Lamp Only (key LED is on red)
Dial a digit (0-4) to set the Ring Type:
0 for Standard
1 for Ring Type A
2 for Ring Type B
3 for Ring Type C
To set up Line Key ringing at your Super
Display:
Setting Up Line Key Ringing (Super Display)
Select the Ring Assignments sub-menu.
Menu +
Ringing
Select the Key Assignments sub-menu.
Key
Assignments
Your line keys will light. Press a line key repeatedly to set its ringing mode:Line
• Always (key LED is on green)
• Night Ring (key LED flashes slow green)
• Delay Ring (key LED flashes fast green)
• Lamp Only (key LED is on red)
Dial a digit (0-4) to set the Ring Type:
0 for Standard
60 | DSX | Features
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/
To Next Page
Loading...
