NEC DSX Feature Handbook

Dial Number Preview
Dial Number Preview lets you preview and edit a number before the system dials it out.
Using Dial Number Preview
To dial using Dial Number Preview:
1. Do not lift the handset and do not Press
SPEAKER or INTERCOM.
2. Dial *.
a) The top line of your display shows: Dial Preview
3. Dial the number you want to call.
a) Your display shows the digits for your call.
4. Press a line key.
a) Your call will dial out on the line selected.
Editing the Displayed Number
To correct the displayed digits before dialing them out:
1. Press
VOLUME until the cursor replaces the digit you want to change.
a) Up moves the cursor left; Down moves the cursor right.
2. Dial the digit that you want to replace the cursor.
3. Do one of the following:
a) Press VOLUME to place the cursor over any other digits you want to edit.
b) Press VOLUME down until the entire number displays to the left of the cursor.
The system will only dial the digits to the left of the cursor.
4. Press a line key to have the system automatically dial the displayed number.
Dial Number Preview Editing Example
To replace 2049265410 with 2039265400:
1. Dial
* followed by 2049265410. You see: 2049265410-
2. Press VOLUME up until you see: 20-9265410
3. Dial 3. You see: 203-265410
4. Press VOLUME down until you see: 20392654-0
5. Dial 0. You see: 203926540-
6. Press VOLUME down until the entire number displays to the left of the cursor. You see: 2039265400-
7. Press a line key to dial number.
62 | DSX | Features
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/

NEC DSX Specifications