Setting the Off Hook Ringing Volume
Preset
• This preset sets the default volume of your Off-Hook Ringing.
To set the Off-Hook Ringing Volume Preset at a keyset:
Setting up the Off-Hook Ringing Volume Preset (Keyset)
Next: Go to next selection. Prev: Go to previous selection. Select: Select current Option. Back: Back out
of current option. Exit: Exit Menu setup.
Select the Off-Hook Ringing Volume Preset sub-menu
Menu +
12
Turn the default Off-Hook Ringing volume down. The minimum setting is off.
Down
Turn the default Off-Hook Ringing volume up.Up
Save your entry and back up to the previous level.Back
To set up the Off-Hook Ringing Volume Preset at a Super Display:
Setting up the Off-Hook Ringing Volume Preset (Super Display)
Next: Go to next selection. Prev: Go to previous selection. Select: Select current Option. Back: Back out
of current option. Exit: Exit Menu setup.
Select the Off-Hook Ringing Volume Preset sub-menu.
Menu +
Volume
+
Off-Hook
Ring
Turn the default Off-Hook Ringing volume down. The minimum setting is off.
VOLUME
v
Turn the default Off-Hook Ringing volume up.VOLUME
^
Save your entry and back up to the previous level.Back
Exit to the idle menu display.Exit
DSX | Features | 143
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/
To Next Page
Loading...
