NEC DSX - Page 142

To set up the Off-Hook Signaling options at your keyset:
Setting Up Off-Hook Signaling (Super Display)
Next: Go to next selection. Prev: Go to previous selection. Select: Select current Option. Back: Back out
of current option. Exit: Exit Menu setup.
Select the Off-Hook Signaling sub-menu
Menu +
Features
+ More +
Offhook
Signal
Set the options for Off-Hook Signaling from outside lines.
CO
Lines
Select the Camp On option.Camp
On
Select the Off-Hook Ringing option.Offhook
Ring
Disable Off-Hook Signaling from outside calls.None
Go back one level.Back
Exit to the idle menu display.Exit
Set the options for Off-Hook Signaling from Hotline calls.Hotline
Select the Camp On option.Camp
On
Select the Voice Over option.Voice
Over
Disable Off-Hook Signaling for Hotline calls.None
Go back one level.Back
Exit to the idle menu display.Exit
Set the options for Off-Hook Signaling from Intercom calls.Intercom
Select the Camp On option.Camp
On
Select the Voice Over option.Voice
Over
Disable Off-Hook Signaling for Intercom calls.None
Go back one level.Back
Exit to the idle menu display.Exit
Back up to the previous level.Back
Exit to the idle menu display.Exit
142 | DSX | Features
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/