NEC DSX Feature Handbook

To redial your last call at a Super Display:
1. Press
REDIAL.
a) If you select a line key before this step, the newest call is automatically redialed when you press REDIAL
(just like Standard Last Number Redial).
2. Push the soft key for the number you want to call.
3. The system tries to use the same line as that used for your initial call.
a) If that line is busy, the system automatically selects a line from the same group as your initial call.
b) If you hear busy tone and your extension has Line Queuing, you can dial 2 to wait for a line to become free.
c) If you hang up, the system converts the queue to a Line Callback.
With Line Queuing, the number automatically redials when a line is available.
To erase (clear) all the numbers from your Enhanced Last Number Redial memory:
1. Press
REDIAL + CLEAR.
2. Do one of the following:
a) Push Yes to clear the Last Number Redial memory.
b) Push No to back up to the previous level without clearing the Last Number Redial memory.
DSX | Features | 121
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/

NEC DSX Specifications