NEC DSX Feature Handbook

Setting Up a Prime Line (Keyset)
Scroll forward to Secondary Prime Line.
Next
Enter the setup mode for the displayed Prime Line type (Primary or Secondary).Select
Press one of the following keys to set it as your Prime Line:Select a
Prime
Line key.
• Line key
• Loop key
• INTERCOM
You cannot choose a line group as your Prime Line from your telephone.
It must be set for you in system programming. Ask your communications
manager.
Save the displayed selection.Save
Cancel without saving the displayed selection.Cancel
Go back to the previous level.Back
To set up a Prime Line at a Super Display:
Setting Up a Prime Line (Super Display)
Next: Go to next selection. Prev: Go to previous selection. Select: Select current Option. Back: Back out
of current option. Exit: Exit Menu setup.
Select the Prime Line sub-menu.
Menu +
Key
Assignment
+
Primeline
Keys
Select Primary Prime Line assignment or Secondary Prime Line assignment.
Primary
or
Secondary
Press one of the following keys to set it as your Prime Line:Select a
Prime
Line key.
• Line key
• Loop key
• INTERCOM
You cannot choose a line group as your Prime Line from your telephone.
It must be set for you in system programming. Ask your communications
manager.
Save the displayed selection.Save
Cancel without saving the displayed selection.Cancel
Go back one level.Back
Exit to the idle menu display.Exit
Go back one level.Back
Exit to the idle menu display.Exit
150 | DSX | Features
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/

NEC DSX Specifications