NEC DSX - Page 162

Being Monitored (if more than one extension is monitoring your phone).
b) You can place and answer calls normally. You automatically return to being monitored when your call is
done.
c) You do not receive voice-announcements, ringing, or Paging announcements.
d) While your telephone is idle, the Feature Key, SPEAKER, and INTERCOM LEDs don’t light. However, your
telephone and LEDs operate normally when you lift the handset.
4. Choose one of the following:
a) Push Talk to place an intercom call to the extension that is monitoring you.
b) Push Exit to end the monitoring session.
To disable Room Monitor at an extension:
1. Press
DND.
2. Push Off.
To monitor an extension that has room monitor enabled:
1. Place an Intercom call to the extension you wish to monitor.
2. If you have a Call Coverage, Hotline, or Reverse Voice Over key for the extension you wish to monitor:
a) It lights orange if the extension has Room Monitor enabled.
b) It lights green when you start monitoring.
c) You can press it to monitor the destination extension.
3. If the extension you called has Room Monitor enabled:
a) You see:
Monitoring (name or extension number).
b) You automatically start monitoring the extension.
c) While monitoring, you can place and answer calls normally and receive Paging announcements. You
automatically return to monitoring when your call is done.
4. Choose one of the following:
a) Push Talk to place an intercom call to the extension that is monitoring you.
b) Push Exit to end the monitoring session.
162 | DSX | Features
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/