NEC DSX - Page 178

5. Hang up.
To Transfer your call using Hotline Automatic Transfer:
1. Do not hang up.
2. Press a Hotline key.
3. Do one of the following.
a) Announce the call to make a Screened Transfer, then hang up.
b) Press the flashing line key to return to the call if your co-worker doesn't want it.
c) Hang up to send the call through unscreened.
d) Press
V_MAIL to Transfer the call to your co-worker's mailbox.
4. Hang up.
a) If you don't have Hotline Automatic Transfer enabled for your extension, hanging up in this step disconnects
the call.
To Transfer a call to your co-worker’s speakerphone using Handsfree Transfer:
1. While on an outside call, do one of the following.
a) Press
TRANSFER and dial a co-worker's extension number.
b) Press Hotline key for your co-worker.
2. Listen for two beeps.
a) If you hear ringing instead of two beeps, you cannot use Handsfree Transfer.
3. Press FLASH to send the call directly to your co-worker’s speakerphone.
a) You can optionally press TRANSFER to get Intercom dial tone and select another co-worker for the Transfer.
178 | DSX | Features
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/