NEC DSX - Page 30

Announce the call to make a Screened Transfer.a)
• Hang up if your co-worker accepts the call.
b) Hang up to send the call through as an Unscreened Transfer.
c) Press the flashing line key to return to the call if your co-worker doesn’t want it.
5. When you Transfer a call, it will recall to you if it is unanswered at the destination. If you don’t answer the recall,
it diverts to Key Ring.
To set up Call Coverage key ringing at your keyset:
Setting Up Call Coverage Key Ringing (Keyset)
Next: Go to next selection. Prev: Go to previous selection. Select: Select current Option. Back: Back out
of current option. Exit: Exit Menu setup.
Select the Call Coverage keys sub-menu.
Menu +
41 +
Next
Your Call Coverage keys will light. Press a key repeatedly to set its ringing mode.
Dial a digit (0-4) to set the Ring Type:
Select
0
for Standard
1 for Ring Type A
2 for Ring Type B
3 for Ring Type C
To set up Call Coverage key ringing at your Super Display:
Setting Up Call Coverage Key Ringing (Super Display)
Select the Ring Assignments sub-menu.
Menu +
Ringing
Select the Key Assignments sub-menu.
Key
Assignments
Your Call Coverage keys will light. Press a key repeatedly to set its ringing
mode.
Dial a digit (0-4) to set the Ring Type:
Call
Coverage
0
for Standard
1 for Ring Type A
2 for Ring Type B
3 for Ring Type C
To assign a Call Coverage key:
1. Push Menu.
• Super Display: Push Key Assignment + Feature Keys.
• Keyset: Dial 51.
30 | DSX | Features
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/