NEC DSX - Page 46

Using Caller ID Logging (Keyset)
•
INTERCOM
• Line (1-64)
• Line Group (90-98)
3. Verify and optionally edit the number your want to store + Hold.
4. Verify and optionally edit the name for the number you want to store
+ Hold.
5. You return to the previous menu.
Push to delete the displayed log.Del
Go back to the previous menu.Exit
Push to display just the unanswered calls in your Caller ID log.Unan
Push VOLUME repeatedly to scroll through the log. The display has two
modes (Name and Number), and you press CHECK to switch between the
modes:
Name Mode
VOLUME
Caller's Name [Log #]
Date Time
Call Store Del Exit
Number Mode
Caller's Number [Log #]
Line Name Log Type
Call Store Del Exit
Push to place a call to the displayed log.Call
Push to store the displayed log in a Personal Speed Dial number.Store
1. Enter the Personal Speed Dial location in which you want to store the
logged number (701-720) + Hold.
2. Enter the route over which the stored number should dial + Hold. The
choices are:
• INTERCOM
• Line (1-64)
• Line Group (90-98)
3. Verify and optionally edit the number your want to store + Hold.
4. Verify and optionally edit the name for the number you want to store
+ Hold.
5. You return to the previous menu.
Push to delete the displayed log.Del
Go back to the previous menu.Exit
Delete all the calls in your Caller ID log.Del*
Push to delete all the calls in your Caller ID log, then push Exit to go back
to the idle menu display.
Yes
46 | DSX | Features
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/