NEC DSX - Page 68

3. The following chart shows the available DSS Console Feature Key assignments.
DSS Console Feature Key Assignments
OperationCode and DataDescriptionKey Type
N/A0Use this option to
designate a Feature Key
Undefined
as undefined (no
function).
Press the key to place or
answer call.
03 + nn (line number
1-64)
Use this option to assign
a Feature Key as a line
key.
Line
Busy Lamp Field (BLF)
Off: Line is idle or not installed.
On (red): A co-worker is busy on the line or has the line on Exclusive Hold.
On (green): You are busy on the line.
Wink On (red): On System Hold at a co-worker’s extension.
Wink On (green): On System Hold at your extension.
Double Wink On (green): On Exclusive Hold or recalling your extension.
Slow Flash (red): Line is ringing.
Slow Flash (green): Line is ringing or your extension directly.
Press key to Park or
retrieve parked call.
04 + nn (Park Orbit
60-69)
Use this option to assign
a Feature Key as a Park
Orbit key.
Park Orbit
Busy Lamp Field (BLF)
Off: Orbit is idle.
On: Orbit is holding a parked call.
Wink On (green): Orbit is holding a call you parked.
Press key to call Hotline
partner.
05 + nnn (extension
number)
Use this option to assign
a Feature Key as a
Hotline key. You cannot
Hotline
set up a hotline for an
outside line.
Busy Lamp Field (BLF)
Off: Partner extension is idle.
On: Partner extension is busy or ringing.
Medium Flash: Partner extension is in DND for outside calls (option 1).
Fast Flash: Partner extension is in DND for Intercom calls (option 2) or All
Calls (option 3).
Press key to call covered
extension or pick up
ringing call.
06 + nnn (extension
number)
Use this option to assign
a Feature Key as an
immediately ringing Call
Coverage Key.
Call Coverage
07 + nnn (extension
number)
Use this option to assign
a Feature Key as a lamp
only (no ring) Call
Coverage Key.
68 | DSX | Features
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/