Issue 4.1 UNIVERGE SV8100
3 - 78 Installing the SV8100 Chassis
3. Swing access panel outward and unplug fan power cable. See
Figure 3-102 Opening Chassis Access Panel (19” Chassis).
4. Remove chassis access panel from rear of chassis.
5. Remove cabling from retention clips. See Figure 3-103 Chassis
Access Panel Removed.
6. Remove two screws securing fan to access cover. Keep
screws for use when installing replacement fan (refer to Figure
3-103 Chassis Access Panel Removed on page 3-78).
Figure 3-102 Opening Chassis Access Panel (19” Chassis)
Figure 3-103 Chassis Access Panel Removed
To Next Page
Loading...
