Issue 4.1 UNIVERGE SV8100
5 - 62 Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
7. Carefully push the Serial cable into the Serial Cable
Groove (ITL, DT700 only).
8. Using the guides, slide the DCL-60-1 onto the
installed bracket (refer to Figure 5-70 Press Serial
Cable into Groove).
9. Secure the DCL-60-1 CONSOLE to the bracket with
the two screws provided.
Figure 5-70 Press Serial Cable into Groove
Figure 5-71 Securing the DCL-60-1 CONSOLE
with Screws
To Next Page
Loading...
