120 User Manual Version 3.1
Protocol
code
Display message Cause
067 ERROR: USB-PORT UPDATE
REQUIRED!
CODE: 67
USB port outdated
Elimination
• Update the USB port • Call service
Pos: 79.46 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Error Messages/73b_P AP._LENGTH_TOO_LA RGE_SHUTTLE_HEAD_ONLY @ 2\m od_1274867145647_91 2.doc @ 17627 @
Protocol
code
Display message Cause
073 PAP. LENGTH TOO LARGE MAX.
VALUE:
CODE: 73
Wrong paper length during
paper size measurement or at
job start from PC
Elimination
• Check if the paper size is
within the printer
specifications
• Check if the correct paper
size is sent from the PC
Pos 79.47 /Bedienungsan leitungen/Geräte spe zifisch/Dr ucker/Error Messages/74_E RROR: TCP-PORT (ONLY 619-Pl atine) @ 3\mod_1283169 503780_912.doc @ 27264 @
Protocol
code
Display message Cause
074 ERROR: TCP-PORT
CODE: 74
An error occurred during
initialising the TCP device
Elimination
•
Pos: 79.48 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Error Messages/75_ NO MAC ADDRESS FOUND (ONLY 619-Platine) @ 3\mod _1283169650711_912.doc @ 27270 @
Protocol
code
Display message Cause
075 NO MAC ADDRESS FOUND
CODE: 75
MAC address not set in the
board memory
Elimination
• Call service
Pos: 79.49 /Bedienungsan leitungen/Gerät e spezifisch/Dr ucker/Error Messages/ 76_NO TCP CONNECTION DETECTED! (ONLY 619-Platine) @ 3\mod_1283169654710_912. doc @ 27276 @
Protocol
code
Display message Cause
076 NO TCP CONNECTION DETECTED!
CODE: 76
No TCP connection could be
established
Elimination
• Plug in the TCP cable
Pos: 79.50 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Error Messages/78_ NO PEN BOARD DETECT! RESET THE P RINTER!_FW_V_4.8 @ 3\ mod_1290009693885_912.doc @ 28363 @