2: Ink costs and ink range This line shows one of the following information:
InkCosts/Job Calculates and shows the cost of ink
for the current print job in the set currency.
Costs/1000Pg Calculates and shows the cost of ink
per 1,000 pages of the current print job.
Pages/Cartr. Calculates and shows the number of
pages you can print, of the current print job, with the
remaining amount of ink in the cartridge.
Please consider that the information above are
calculated average values only. Therefore the
accuracy of the values will increase as more pages are
printed.
To show information in this line, you first have to set
a cost per cartridge greater than zero. To do this,
select this line and hit the Ok
key. Or you can open
the main menu of the printer and select the following
menu: PRINTER CONFIG. > INK > INK COST CONFIG.
3: Shuttle speed This line shows the currently set shuttle speed. To
change the speed select this line and use the arrow
right
or arrow left key to change the speed.
Please note that the speed you can select is limited by
the set print quality (see line 6). With a print quality
of 6 x 6 dpi, the maximum speed you can set is 0.540
meter/second.
This setting can be locked, so that a print quality
setting, send from the PC is ignored. To lock this
setting, select this line and press the Ok
key for
three seconds. A ± symbol appears next to the
quality setting, showing that it is locked now.
To unlock the setting select this line again and press
the Ok
key for three seconds. The ± symbol
disappears again.
4: Throughput This lines shows one of the following information:
Pages/h: Shows the current throughput of the
machine, calculated from the last few pages.
ø JOB Pages/h: Shows the average through since the
beginning of this print job. This is a valuable
information to measure the actual productivity of the
machine.
5: Ink type This line shows the currently set ink type.
To Next Page
Loading...
