28 User Manual Version 3.1
6: Print quality This lines shows the currently set print quality. To
change the quality select this line and use the arrow
right
or arrow left key to change the quality.
Please note that the selected print quality determines
the maximum speed of the machine.
This setting can be locked, so that a print quality
setting, send from the PC is ignored. To lock this
setting, select this line and press the Ok
key for
three seconds. A ± symbol appears next to the
quality setting, showing that it is locked now.
To unlock the setting select this line again and press
the Ok
key for three seconds. The ± symbol
disappears again.
7: Print direction This line shows the set print direction.
Nor The print layout is printed in normal direction.
Rev The print layout is printed 180° turned.
Please refer to the section “Menu” of this manual, to
get more detailed information about print direction.
This setting can be locked, so that a print direction
setting, send from the PC is ignored. To lock this
setting, select this line and press the Ok
key for
three seconds. A ± symbol appears next to the
direction setting, showing that it is locked now.
To unlock the setting select this line again and press
the Ok
key for three seconds. The ± symbol
disappears again.
8: Status This line shows the printer status and the used
interface.
OnlinUSB The printer is ready to receive print data
from the PC via the USB interface. No changes to
printer settings via a printer menu can be made when
the printer is Online.
OnlinTCP The printer is ready to receive print data
from the PC via the Ethernet interface. No changes to
printer settings via a printer menu can be made when
the printer is Online.
Offline The printer menus can be accessed and
changes to settings can be made when the printer is
Offline.
Changing from OnlinUSB or OnlinTCP to Offline: Hit
the Cancel
key.
Changing from Offline to Online: Select this line
(line 8) in the main menu (see Figure 7 above) by
hitting the Cancel
key or using the arrow down
key and then hit the Ok
key.
To Next Page
Loading...
